KK sir~救命! (AD1955 pcb) 我應否焊下去定馬上收手?
KK Sir ~U103(HEF4094)一點錫即變成咁!
我應否焊下去定馬上收手?
請覆~好心急~~
THANKS!!!!
DYNA~
:( http://farm4.static.flickr.com/3174/2845340921_d9a926f409_b.jpg :(會唔會係電烙铁唔夠熱
DYNA 得閒加我 MSN : tony0500@hotmail.com Dyna,
Stop, let me help you to soldering the SMD only.
For the broken pad, I will help you to recover.
Possible reason :
1. Your solder iron not enough heat
2. You adding to much "FORCE"
3. Your soldering iron tips like a knife.
You should use "solder wire" form a liquid style (by add heat) and coat on the top of IC.
Don't too much worry.
KK. Sorry Dyna, I press a wrong button of EDIT, erase your text....
KK :(會唔會係電烙铁唔夠熱
DYNA 得閒加我 MSN : tony0500@hotmail.com
TONY
會唔會係電烙铁唔夠熱
(應該幾熱,之前都上近零件,我想好似所講其它原因)
~其實我唔明唔熱又怎會成快銅片脫下來~
Any way...thanks you reply my question.
Ok ~ I will add you Msn this Morning .
Thanks
DYNA 其實為o左焊ic, 我都聽kk 話去買枝"恆溫電烙鐵" --- 但一定要跟幼咀
上次俾人呃左枝幼咀...
不過, 依差不多二百蚊抵俾, 感覺唔一樣 Sam Sam,
Long time no see.
My pleasure to support everyone..
其實為o左焊ic, 我都聽kk 話去買枝"恆溫電烙鐵" --- 但一定要跟幼咀
上次俾人呃左枝幼咀...
不過, 依差不多二百蚊抵俾, 感覺唔一樣
~
Sorry Dyna, I press a wrong button of EDIT, erase your text....KK
KK sir,
我仲以為我問左的唔應問的問題, :) ~KIDDING~
我可否上其它零件先,留返個SMD求你幫手救亡可以嗎?
THANKS!
DYNA
頁:
[1]