標題: 改機利器 [打印本頁] 作者: DUALXEON 時間: 2006-6-28 16:45 標題: 改機利器 以下是改機利器,電吸焊槍.用了真是快靚正.作者: TWM 時間: 2006-6-29 09:29
Tell us more what is it? and how it help?作者: dynamicdog 時間: 2006-6-30 15:09
殺傷力如何?作者: DUALXEON 時間: 2006-7-5 22:34
With built-in pump and temperature control circuit. Suction capacity and desoldering system are further powered up. Removal of chip and SMD components is done with more ease and efficiency. Long life patented filter cartridge. Most of the removed solder and flux is accumulated so that the filter can be kept clean for a longer time.
Direct connection between the diaphragm pump and the tip can provide high vacuum efficiency which can accommodate for the 8-12 layered PCB.
The combination of a 100W ceramic heater with sensor feedback temperature control circuit and high vacuum capacity can provide best work efficiency with no failure.
Protection against ESD is secured.
Quite compact, light-weight unit is portable and ready to use at any location.
Low noise and vibration.
The removal of SMD components can be easily done by a flick of the selector lever and by replacing the tip with the hot blow nozzle.