改 CD33 的鐘 / Changing CD33's Clock

Hi alfcat,
I enclosed the photo link for you easy reference :

http://www.hififever.com/forum/download.php?id=5891

I think you connected the 100v line .so you measure high voltage.

the 9v is near to top  side of the square area of the photo.

Thanks.

hi alfcat,

the two gery colour wires are +-9v try measure it again.

thanks.

hi alfcat,

one touch one of gery colour wire and other touch the RCA surface metal.
to measure.

thanks.

HI ALFCAT,


何將兩個+- 3.4 Volt 加埋做+-7Volt 接去 PCB ,因為這個CLOCK 是用+-入電 ,條
GND就是PCB 正方形OUTUP 圓形是訊号OUTUP接去ORIGINAL CLOCK 位 OF PCB OF CD-33  在圖中黃色格GND ,綠色格便是訊號OUTUP.(我也記不起黃色或綠色是OUTUP)
如果接錯不要緊祗要CHANGE 位)
你是否已CHECK THE READING OF 電阻 OF CLOCK'S PCB.
http://www.hififever.com/forum/download.php?id=5891

HOPE TO HELP YOU

hi alfcat,

would you mind to tell me where to buy the mono power amp and how much?

give more time to let the clock and cd-33 run in, it will be let you have a suprise.


Thanks for sharing.

Hi alfcat,

good morning !!!!

I have read a review from the following web site for modification of you mono block power amp for you reference.
http://www.polkaudio.com/forums/showthread.php?t=49454


Thanks for sharing.

hi alfcat,

你說:
[剛剛找來了一家之老虎乸來試一試聽唔聽到有分別 ... 佢好用心聽話有, 但唔大. Piano 清少少 ... Background 無咁多noise, 而空間感大了又是少少 ...]

這就是換clock 的 result.
你太太的耳聽 better than you. ha ha !!!!!!!!!!!!!!!
恭喜你有位 hifi tester.!!!!!!!!!!!!!!!!!

Thanks.