CDPRO2 + AD1955 2 IN 1.

Specification:

CD PRO2 Module
Seperate power supply for CD PRO2 and DAC.
Power Sequencer for 5V and 9V.

AD1955 DAC section
IIS direct input from CDPRO2 (Sampling rate converter to 192KHz/24 bits)
USB input
SPDIF input (Coaxial)
SPDIF input (Optical)

430mm x 300mm x 70mm H.

Available at Sep-2010.

Am greatly interested in the unit. Looking forward to announcement of price & class time-table!

Hi KK Sir, could you pls advise if the DAC provides both balanced & single-end outputs or only SE. Thanks.

SE OR BAL CONFIG
如果閣下是真的沒有BAL PREAMP, 不要浪費錢砌FULL BAL.

因呢部野真係會幾然貴

建議你地先砌DAC 部份,果度最用得多時間,所以呢個課程會斬開三部份
DAC
CD MECH
FINAL ASSEMBLE

儲定錢吧

落足料的話, 看來10K都未必得...

Assume Single End mode
Full RMG resistor (40 pcs)
BG capacitor over 30pcs
Jensen 4 pole capacitor x 2
OSCON over 30pcs
Schottky diode = 20pcs
AD1955 board
Upsampling board + USB codec
CDPRO2 mech
Chassics (This one is expensive, because I use over 3 month to study)
PSU for CDPRO2 x 2
R-CORE x 3
20 mm alum top plate. Smoth slider
LED array.
MCU board for CDPRO2.


Calculate la 麻手.....

依套好嘢, 個ad1955會唔會有第二個選擇 - 當然只係問下, 好可能你已經心裡閙緊我 "麻檸煩"

不過, 啲米仔(service mount)真係好難....

剛剛睇到, 個鎮好似只有中間粒大波子, 少了外圍的珠珠...是否新設計

全部surface mount 代焊

新版本吾然用呢果"壓"

Except Analog Device AD1955.

Another choice is TI PCM1794A.

富豪版: CDPRO2 + 終極零件(最終極的設定,無可能再有空間再摩改的設定)

半富豪版: CDPRO2 +極品零件(RMG, SILMIC CAP, 真LME49710)

玩住先版: CDM12.1 + 極品零件(RMG, SILMIC CAP, 真LME49710)

期待... 期待.....
I always long for this day coming to alive my CDPRO2 ..... I am looking for a 2nd hand ARC dac-7, should I wait and see your master piece above ???? value price too.

有全銅CDPRO2 托板 (即你見到黑色那塊部份供應)
重然到抬起行吾到十步
所以,Modi Sir 有部份和我一起教的
你們要期待啊