D|Y膽機工具

吾知有無人用.

Is this have FFT and Bodeplot analysis?

I am using Multisim.
It have FFT and bodeplot let easily to observe the phase response, freq. response, step response.

KK.

KK

Tube CAD 有 Tube List 及Tube Curves你個無呀.

我相信有人吾知道有這類工具.只是同網友分享.


你講你在公司用Multisim.不是HiFiFever.
你公司用軟件.要有Rea| Time功能要有RT Series PCI Plug-In DAQ Board.對我們DlYer簡直天方夜譚.

反正主題開了不如你介紹多幾個適合DlYer用.例如SwCAD.








還有講時講.你們學員砌隔離牛吾0K.錯錯錯.快D去幫人.

[quote:bad200432e="DUALXEON"]KK

Tube CAD 有 Tube List 及Tube Curves你個無呀.

Multisim, Allegro, PsPICE can accept spice data, it is more flexible to enter, i.e. once you have the transfer characteristics (X-Y curve), you can simple transfer to data.
But, for the beginner, use the "ready made" data from library is easy. But only limited to the type show in its library.


我相信有人吾知道有這類工具.只是同網友分享.

NO comment


你講你在公司用Multisim.不是HiFiFever.
你公司用軟件.要有Rea| Time功能要有RT Series PCI Plug-In DAQ Board.對我們DlYer簡直天方夜譚.

I use Allegro and Orcad in my home (legal license)
FFT, Bode plot not a 天方夜譚 of the function in mutlisim

反正主題開了不如你介紹多幾個適合DlYer用.例如SwCAD.

Allegro, Cadence, etc


還有講時講.你們學員砌隔離牛吾0K.錯錯錯.快D去幫人.[/quote]

I will check with Admin and Modi about this, we open 隔離牛 course, I at Japan and Taiwan, do know the details., I only at the day 1 class for few hour

[quote:fb6d46c2fb="kk_ho"][quote:fb6d46c2fb="DUALXEON"]KK

Tube CAD 有 Tube List 及Tube Curves你個無呀.

Multisim, Allegro, PsPICE can accept spice data, it is more flexible to enter, i.e. once you have the transfer characteristics (X-Y curve), you can simple transfer to data.
But, for the beginner, use the "ready made" data from library is easy. But only limited to the type show in its library.


我相信有人吾知道有這類工具.只是同網友分享.

NO comment


你講你在公司用Multisim.不是HiFiFever.
你公司用軟件.要有Rea| Time功能要有RT Series PCI Plug-In DAQ Board.對我們DlYer簡直天方夜譚.

I use Allegro and Orcad in my home (legal license)
FFT, Bode plot not a 天方夜譚 of the function in mutlisim

反正主題開了不如你介紹多幾個適合DlYer用.例如SwCAD.

Allegro, Cadence, etc


還有講時講.你們學員砌隔離牛吾0K.錯錯錯.快D去幫人.[/quote]

I will check with Admin and Modi about this, we open 隔離牛 course, I at Japan and Taiwan, don't know the details., I only at the day 1 class for few hour[/quote]

多謝KK 過料我們又學到正嘢.

吾知有無一個Host Software可以P|ug in 其他Software入去.

tube cad 真是幾好.用來看自己砌部機.





砌完部機測試TooL

你們上堂是一定要請教阿Sir.下次自己在家都有嘢玩.最好Software Free :