Question on turntable

Anybody have experience with this turtable? (B&O Beogram 4002)
how to adjust the tone arm?

In Hk easy to get 18inch belt or not?

[quote:92534c2f06="WINDWSS"]Anybody have experience with this turtable? (B&O Beogram 4002)
how to adjust the tone arm?

In Hk easy to get 18inch belt or not?[/quote]

印象中不好找...上uk ebay搵搵...但應該只有thorens, linn盤的belt

可以試下用牙線頂住先 :!:

用牙線要小心的是

1. 最好一個速度, 一條牙線 (33 1/3, 45各一)
2. 個結其實唔可以打到太大, 否則去到轉軸時會唔順, 個結去到轉軸, 會震一下, 仲會有 noise
所以個結唔單係要實, 仲要細同簡單

可以參考 Micro Seiki的建議, 小弟都係用Micro盤...大砧板...不過我有皮帶, 反而在一個cheap cheap jvc盤上試過牙線...真係好有用 :

ok, thanks, never think of the teeth string also can do the job...


For the germany type 5pin DIN socket if i were to change it to RCA just connect pin 3 & 5 right? the the ground connected to the pin 2 (center pin) right?

I had DIY the belt, it work. the plate is moving.

also got sound but the arm will not move when playing the LP --> The arm is just static at 1 position, so the song is keep repeating.....

anybody know how the adjust this auto tracking arm?

第一個pin既問題, 應該無錯, 但小弟一向唱盤都100%日本仔...所以只係睇過但冇試過...

第二個問題枝唱臂, 因對這唱盤唔太熟, 未sure個結構好難答:
只可以說像是 anti-skate setting 問題

還有, 去以下的地方看一看
http://www.acdc.com.tw/temp/about_vinly/about_vinyl2.htm

找出"超距調整"... 那段比較合你的需要 :!:

超級唔得閒, 有機會先再研究下